The Market Forge Sterilmatic STM autoclave is a full size autoclave, roomy and spacious with many features. 220V/50Hz, adjustable temperature without stand. This instrument contains a 16″ dia. x 26″ deep chamber made of clad aluminum, exhaust speed dial with fast (1 minute for instruments and glassware) and slow (10 minutes for liquids) settings and a 0 – 60-minute timer.

The Sterilamatic will heat up to a temperature of 121 C (250 F). The exterior is made of stainless steel for ease of cleaning and sanitation. This unit preheats quickly, reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. It will automatically maintain set temperature with a release pressure and shut off power supply at end of cycle.

All controls are mounted on the front of the apparatus for ease of use. Furthermore the doors lock automatically and cannot be opened until pressure is exhausted. Also incorporated are low-water cutoffs and safety valves.

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

The Sterilamatic will heat up to a temperature of 121 C (250 F). The exterior is made of stainless steel for ease of cleaning and sanitation. This unit preheats quickly, reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. It will automatically maintain set temperature with a release pressure and shut off power supply at end of cycle.

All controls are mounted on the front of the apparatus for ease of use. Furthermore the doors lock automatically and cannot be opened until pressure is exhausted. Also incorporated are low-water cutoffs and safety valves.

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

The Sterilamatic will heat up to a temperature of 121 C (250 F). The exterior is made of stainless steel for ease of cleaning and sanitation. This unit preheats quickly, reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. It will automatically maintain set temperature with a release pressure and shut off power supply at end of cycle.

All controls are mounted on the front of the apparatus for ease of use. Furthermore the doors lock automatically and cannot be opened until pressure is exhausted. Also incorporated are low-water cutoffs and safety valves.

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

This is a fixed-temperature model that heats to 121C (250F). Preheats quickly – reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. Automatically maintain set temperature. Release pressure and shut off power supply at end of cycle.

All controls are front mounted. Doors lock automatically and cannot be opened until pressure is exhausted. Incorporate low-water cutoffs, safety valves. The capacity is 3 cu.ft. Operating pressure is 15 psi (1 atm/100kPa).

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

This is a fixed-temperature model that heats to 121C (250F). Preheats quickly – reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. Automatically maintain set temperature. Release pressure and shut off power supply at end of cycle.

All controls are front mounted. Doors lock automatically and cannot be opened until pressure is exhausted. Incorporate low-water cutoffs, safety valves. The capacity is 3 cu.ft. Operating pressure is 15 psi (1 atm/100kPa).

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

This is a fixed-temperature model that heats to 121C (250F). Preheats quickly – reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. Automatically maintain set temperature. Release pressure and shut off power supply at end of cycle.

All controls are front mounted. Doors lock automatically and cannot be opened until pressure is exhausted. Incorporate low-water cutoffs, safety valves. The capacity is 3 cu.ft. Operating pressure is 15 psi (1 atm/100kPa).

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

The Sterilamatic will heat up to a temperature of 121 C (250 F). The exterior is made of stainless steel for ease of cleaning and sanitation. This unit preheats quickly, reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. It will automatically maintain set temperature with a release pressure and shut off power supply at end of cycle.

All controls are mounted on the front of the apparatus for ease of use. Furthermore the doors lock automatically and cannot be opened until pressure is exhausted. Also incorporated are low-water cutoffs and safety valves.

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above

The Sterilamatic will heat up to a temperature of 121 C (250 F). The exterior is made of stainless steel for ease of cleaning and sanitation. This unit preheats quickly, reaching sterilizing temperature in 8 to 10 minutes from cold start, 3 to 7 minutes in continued use. It will automatically maintain set temperature with a release pressure and shut off power supply at end of cycle.

All controls are mounted on the front of the apparatus for ease of use. Furthermore the doors lock automatically and cannot be opened until pressure is exhausted. Also incorporated are low-water cutoffs and safety valves.

Electricians take note:  This sterilizer is not equipped with cord set.
You will need to either create a cord set, or create a hard-wire connected to a circuit breaker box.
All you need to know from us is what voltage the machine is to be connected to and the phase (single phase, or three phase), which is listed above